SAE AMS4118 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si, (2017; -T4,

时间:2024-05-24 22:39:18 来源: 标准资料网 作者:标准资料网 阅读:8079
下载地址: 点击此处下载
Product Code:SAE AMS4118
Title:Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si, (2017; -T4, -T451), Solution Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of bars, rods, and wire.These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications.
【英文标准名称】:Specimendimensionsandprocedureformechanizedpeeltestingresistancespot,seamandembossedprojectionwelds
【原文标准名称】:电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸
【标准号】:BSENISO14270-2001
【标准状态】:现行
【国别】:英国
【发布日期】:2001-11-08
【实施或试行日期】:2001-11-08
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:尺寸;剥离试验;焊接;试样;凸焊;电阻焊接;缝焊;焊接接头
【英文主题词】:
【摘要】:ThisInternationalStandardspecifiesspecimendimensionsandatestingprocedureformechanisedpeeltestingofsinglespot,seamandprojectionwelds,inoverlappingsheets,inanymetallicmaterialofthickness0,5mmto3mm,wheretheweldshaveamaximumdiameterof7√t(wheretisthesheetthicknessinmm).Withweldsofdiameter>5√tand≤7√t,itispossibletounderestimatethevalueofpeelforcewhenusingtherecommendedtestspecimendimensions.Theobjectofmechanizedpeeltestingistodeterminethepeelforcethatthetestspecimencansustain.
【中国标准分类号】:J64
【国际标准分类号】:25_160_40
【页数】:20P;A4
【正文语种】:英语


基本信息
标准名称:锰矿石化学分析方法 化合水量的测定
英文名称:Manganese ores- Determination of combined water content
中标分类: 矿业 >> 黑色金属矿 >> 锰矿
ICS分类: 采矿和矿产品 >> 金属矿
发布部门:国家技术监督局
发布日期:1994-01-18
实施日期:1994-10-01
首发日期:1994-01-18
作废日期:1900-01-01
主管部门:中国钢铁工业协会
提出单位:中华人民共和国冶金工业部
归口单位:全国钢标准化技术委员会
起草单位:有色金属总公司矿产地质院
起草人:吴双凤、张吉念、舒柏崇
出版社:中国标准出版社
出版日期:1994-10-01
页数:4页
适用范围

本标准规定了用重量法测定化合水量。本标准适用于锰矿石中化合水量的测定。测定范围:1.00%~8.00%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 矿业 黑色金属矿 锰矿 采矿和矿产品 金属矿